Light lines on LED profiles

Light lines on LED profiles

With the development and popularization of LED technology, various types of profiles for LED tapes and modules have developed strongly on the lighting market They serve as housing for the "low-esthetic" bar with LED diodes and heatsink, which extends the life and reduces the effect of glare, and above all allows you to achieve very interesting lighting arrangements. As a result, they are increasingly used in our surroundings. 
led tube light

Can you get a light line on each profile?

This question is asked every day from customers on our Sales Department because they expect such an effect more and more often. Unfortunately, you can not get a line of light on every profile it depends on several factors. One of them is the number of LEDs on the module - the led strip has a higher diode density, the better the effect of the light line. The second important aspect is the distance between diodes and the shutter - the higher it is, the easier it is to achieve. Unfortunately, the greater the distance of the light source from the iris, the less light emits the profile with the tape. Summing up, the binding made on such a profile is more decorative than lighting. The most important factor to easily get a light line is the appropriate shade of the profile. A large group of dairy shades is designed to let as much light as possible. Therefore, these types of lenses do not work well in the effect of the light lines, because they are visible diode points.

Profiles dedicated to the effect of the light line.

In the offers of manufacturers of aluminum profiles for LED strips, more and more often you can find special profiles and apertures dedicated to easily obtain a line of light. For example, the family of PDS profiles in which it is enough to use an LED strip with a density of 120 LED / 1m and a special lens LIGER to achieve the effect of the line light. This type of shade is also available for larger profiles from the architectural family.
When writing about the issue of linear light, you can not fail to mention dedicated solutions. The construction of these profiles allowed to achieve the effect of the line already at the belt with a density of only 60 LED / 1m. Such solutions are perfect for clearance lighting.
If you still do not know if the profile you want to choose allows you to get a light line, contact our Help Department. Our experts will be happy to advise you on which components to choose, and if you pay more, charge the appropriate DISCOUNT.
If you are looking for lighting inspiration, check out our LED realization gallery.
click here for more info.

Comments

Post a Comment

Popular posts from this blog

LED bulbs for the office

LED bulbs for the office When you are just wondering what type of LED bulb will suit your home or business, first of all, remember to choose only products of proven and recognized brands. It is also good to pay attention to several important parameters that you should find on the packaging of bulbs. Size and mounting of the bulb With regard to each bulb, including the LED bulb , the size and fixings are very important. They should match the luminaires you have. Also, pay attention to the information on the decals and luminaire instructions. From them, we can find out which parameters of the bulbs will be the most appropriate. The previous bulb may also help you. However, you must remember that we can distinguish the corresponding so-called large thread. The power and brightness of the light bulb The next parameter you need to consider is the luminous flux. It is expressed in lumens that are emitted by a light bulb. The bigger the indicator, the more light the bulb shines. It is...
Read more

LED industrial lighting on the example of High Bay ROD luminaries

LED industrial lighting on the example of High Bay ROD luminaires Electricity, which is becoming more and more frequent, is increasingly imposing on users large-surface premises (warehouses, production halls) seeking savings in its consumption. One of the simpler, and at the same time effective way to lower electricity bills, is the replacement of traditional lighting with integrated LED luminaires. At the present time, they can be purchased at much lower prices, compared to what we have seen 2-3 years ago. Thanks to this, the investment in new lighting returns after a year. Unfortunately, along with the drop in prices on the market, many lighting fixtures have appeared that, apart from the low price, offer nothing more. Their use may be associated with large problems resulting from the rapid failure. It often happens that cheap lighting fixtures do not meet Polish Norms, Reliability, performance and meeting the required standards are key parameters of LED industrial lighting Wareh...
Read more

To consider when buying LED lamps

To consider when buying LED lamps The market for LED lighting is constantly growing. At the same time, everyone in the industry claims that they sell high-quality products. On various internet sites on the Internet, you will find several retailers who specialize in lighting. Just because the product description contains the phrase "high quality" or "best" does not mean that these really meet the requirements. Which brands should be chosen? China produces more than 60% of all  LED lights  in the world. But one problem is that it can be difficult to know if these keep the quality. It would also be very expensive to test all the different brands' durability and durability. Well-known brands such as Crest LED have tested their products and support its quality and thus its credibility. Thus, it is also best to buy led lamps from well-known manufacturers. Tips for finding the right LED light The base of the lamp and which room you place the lamp in are thi...
Read more